PHENOLIC

Product Detail

Fabric Phenolic sheets for structural and mechanical applications. Phenolic is a hard, dense material made by applying heat and pressure to layers of fabric, impregnated with a synthetic resin. 

These phenolics are approximately half the weight of aluminum and their physical toughness resists abrasion, friction, impact and material fatigue. It has special properties that fight off the corrosive action of water and many chemicals, increasing the service life and efficiency of your product parts.

Specifications:

1) Thickness: 0.5-120mm

2) Width x length: 1020 x 1220mm; 980 x 1980mm; 1000 x 2000mm

Applications:

It is used for the insulating spare parts of electrical appliances and transformers, textile machines, gears, fixed frames for bearings and noise reduction.

Technical Data:

Item	Unit	Value
Density	g/cm3	1.45
Heat resistance	?	140
Water absorption	%	<1.5
Flammability class	UL94	HB
Bending strength	MPa	=120
Compression strength	MPa	=250
Tensile strength	MPa	=100